Order Online, Collect From A Local Dealer - View Products ›

Eliet TL450 PRO Vacuum 18hp B&S

In stock
SKU
EL-MA 027 010 113

£4,635.96

Features-

1. Suction Turbine - The suction turbine with large diameter (450 mm) guarantees considerable suction capacity..

2. Sound-Damping Turbine Wall- Every leaf or stone that is sucked up moves with the airflow through the suction hose until it hits the impeller.

3. Transparent Suction Hose- The ELIET Truckloader is supplied factory fitted with a transparent flexible vacuum suction hose. The highly flexible suction hose measures 3.5 metres and is transparent.

4. Propeller-The propeller is attached to the crankshaft by means of a conical drill socket, making for easy dismounting.

5. Grips- Two sturdy grips enable two people to lift the machine and hook it onto the truck.

6. 360° Swivelling Discharge Hose- The discharge hose with directional louvre has a diameter of 200 mm, just like the suction hose, which makes obstructions virtually impossible.

7. Supports- The supports by which the machine is attached to the truck have adjustable feet with rubber soles.

8. Directional Louvre- The end of the discharge hose is equipped with a deflector flap in order to completely fill the loading space of a lorry.

9. Easy Storage- The frame sits on two wheels that provide for easy manoeuvring and easy storage.

SUCTION TURBINE

The suction turbine with large diameter (450 mm) guarantees considerable suction capacity. In addition, both the suction hose and the discharge pipe have a 200 mm diameter, ensuring easy pass-through of the vacuumed material and practically excluding blockage.  The cover on the suction turbine can be replaced in case of wear.  The suction turbine is lined with rubber to dampen the thumping sound made by the vacuumed material.

SOUND-DAMPING TURBINE WALL

Every leaf or stone that is sucked up moves with the airflow through the suction hose until it hits the impeller. Centrifugal force throws everything against the wall of the turbine where it then follows the contours of the volute housing before ending up in the discharge hose. The turbine wall, therefore, acts as a type of drum that generates a lot of noise. However, ELIET have been able to efficiently absorb the noise from each impact by fitting a suitable rubber lining around the turbine.

TRANSPARENT SUCTION HOSE

The ELIET Truckloader is supplied factory fitted with a transparent flexible vacuum suction hose. The highly flexible suction hose measures 3.5 metres and is transparent.  The suction mouth rests on a swivel caster, making it unnecessary to hold it up constantly. The light and transparent suction hose does not hinder the movement freedom and ensures you can immediately locate and remove obstructions in the hose. A special quick connect system makes for easy disconnection of the hose from the machine. When doing so, the associated safety device immediately switches off the engine. 

Alternatively, one can opt for an “EasyhandleTM”:  a suction mouth with two swivel casters and a moveable seat, providing the operator with even greater comfort.  A support arm at 1.5 metres on the suction hose prevents it from dragging on the surface, eliminating any corresponding wear.

PROPELLER

The propeller is attached to the crankshaft by means of a conical drill socket, making for easy dismounting.

GRIPS

Two sturdy grips enable two people to lift the machine and hook it onto the truck.

360° SWIVELLING DISCHARGE HOSE

The discharge hose with directional louvre has a diameter of 200 mm, just like the suction hose, which makes obstructions virtually impossible. The articulated hose made from welded wear-resistant steel components can swivel through 360°. The nylon pivot point is self-lubricating, so it never becomes blocked by dirt or rust.

SUPPORTS

The supports by which the machine is attached to the truck have adjustable feet with rubber soles.

DIRECTIONAL LOUVRE

The end of the discharge hose is equipped with a deflector flap in order to completely fill the loading space of a lorry. This flap can be adjusted to any angle. The shape of the flap ensures that the airflow does not immediately diverge when it leaves the discharge hose, thus making the airflow easier to direct.

EASY STORAGE

The frame sits on two wheels that provide for easy manoeuvring and easy storage.

More Information
Display SKU MA 027 010 113
Manufacturer Eliet
Model MA 027 010 113
Engine Power 18hp
Engine Make Briggs & Strattons
Professional/ Domestic/ Hire Professional
Overall Dimensions 980 x 790 x 1520 mm
Weight 125kg
Wheeled Yes
Air output 108 m³/min
Air speed 260 km/h
Noise level 112 dB(A)
Capacity 12L

PSD Groundscare is part of the GGM Group which means we have a proven infrastructure in place to offer professional service and backup, and with the GGM retail store we are also in contact with the commercial users in our locality, this gives us the information and needs required by both the end users and dealers alike to ensure a seamless service to keep you going. 

Obviously supply of the machines is just the start...with our extensive network of professional dealers across the UK who are there to offer you experienced advice, service and backup they are supported by our extensive spare parts stock, fully trained technicians and sales staff.    

At PSD Groundscare we focus on Groundscare equipment which maximises Productivity, Safety and Durability, delivering solutions to all your landscaping needs:       

  • MACHINERY FOR US IN THE MOST DEMANDING CONDITIONS
  • ROBUST & HIGHLY DEPENDABLE MACHINERY
  • NATIONAL DEALER NETWORK SO THE GUIDANCE YOU NEED IS NEVER FAR AWAY