Order Online, Collect From A Local Dealer - View Products ›

Used Prof 5 B Self Propelled Shredder

In stock
SKU
11011427

£6,595.00

Eliet Prof 5 B hydro+ZR+ABM

Self-propelled (wheeled) Shredder comes with Subaru EX40 (Electric start) Hydraulic Feed roller & ABM L system

Features Includes-

  • Feed Roller This significantly increases the output of the machine.
  • Feed-in Funnel By means of the wide feed-in opening (560 mm x 520 mm) with auxiliary feed, there is no problem feeding in large amounts of green waste.
  • Stable Wheel Base With a wheel base 780 mm wide, this shredder is extremely stable even if one temporarily deviates from the beaten tracks.
  • Engine Clutch The advantage of this is that one can start the engine in idle which is beneficial for the life span of the starter motor. 
  • Eliet Blades The Prof 5B is designed to operate at least 8 hours a day.
  • Electric Starter  This modern engine has OHC (Overhead Cams) technology which enables higher compression in the cylinder which translates into better performance.
  • Wheel Drive  Each of the two drive wheels is equipped with a powerful hydraulic motor.

BLOW CHUTE
For the first time Eliet offers the possibility of installing a blow chute for the removal of chips. What is interesting about this blow chute is that Eliet integrated a genuine blower turbine into the design so that the machine has a powerful discharge system. In contrast to many other shredders on the market that have chip-discharge blowers, the PROF 5 can also handle damp natural trimmings very well and with hardly any danger of blockage of the turbine. By integrating a genuine blower turbine, the PROF 5 benefits from a suction effect through the feed hopper. This ensures that the feeding of leafy natural trimmings goes much more smoothly because the material is, as it were, sucked into the shredding chamber.

FEED ROLLER
The PROF 5 is also available with the option of a hydraulic feed roller. This significantly increases the output of the machine. You only have to feed the wood in, and then the machine conveys it inside by itself. The force with which this feed roller does its work leaves even the most twiggy branches no chance at all. Large volumes of leafy trimmings are also mercilessly fed to the blades. One can manually adjust the rotation of the feed roller (reverse – feed – stop). This operating governor is next to the feed-in opening and is thus always within reach as an emergency stop.

ABM SYSTEM
The ELIET PROF 5 in the Blower version (B) has an additional option, namely an ABM system (Anti-Block Motor), also used in the ELIET Super Prof 2000. This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine. When the engine RPM suddenly slows, the ABM electronics will respond accordingly by briefly reducing the speed of the feed roller. While the machine shreds all the wood, regulating itself, you can simply continue to work without keeping an eye on the machine.

IMPELLER
Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 330 mm blade turbine.

FEED-IN FUNNEL
The PROF 5 is a full-blooded green waste processor. Garden contractors mainly have to deal with voluminous natural trimmings primarily from hedges, shrubs, bushes, plants … thus the PROF 5 becomes their indispensible partner. By means of the wide feed-in opening (560 mm x 520 mm) with auxiliary feed, there is no problem feeding in large amounts of green waste. The feed-in funnel does not reduce further in size in the direction of the blade axis.

STABLE WHEEL BASE
The PROF 5 is constructed from a strongly welded frame and rests on a couple of large tires. With a wheel base 780 mm wide, this shredder is extremely stable even if one temporarily deviates from the beaten tracks. The large swivel castor wheels enable the PROF 5 to easily navigate through narrow garden passageways. The machine is equipped with a parking brake for maximum safety while working and during transport.

ENGINE CLUTCH
The PROF 5 B version is equipped with a blade clutch. The advantage of this is that one can start the engine in idle which is beneficial for the life span of the starter motor. Furthermore, the blower turbine can be turned off in this way in order to safely drive the shredder. The blade system is also blocked when the clutch is disengaged.

ELIET BLADES
The blades that are fitted to the Prof 5B are not ordinary steel blades. The Prof 5B is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.

ELECTRIC STARTER
For the PROF 5 B, ELIET opted for a 14 HP Subaru Robin engine because of its favourable torque curve. This modern engine has OHC (Overhead Cams) technology which enables higher compression in the cylinder which translates into better performance. The camshaft is driven by a chain for very precise valve timing and again more stable functioning. The engine comes standard with an electric starter.

WHEEL DRIVE
Your comfort was the priority that was top of our engineer's minds when they designed the wheel drive. You cannot simply move a shredder weighing 350 kg wherever you want. So the Prof 5B is also available self-propelled. Each of the two drive wheels is equipped with a powerful hydraulic motor. If you purchase the self-propelled version, then you will be able to navigate any rugged terrain or slope with the greatest of ease. The swivel caster wheels provide the necessary manoeuvrability for weaving between obstacles in gardens, parks and woods. A handlebar mounted lever allows you to change forward or reverse speeds with a simple flick of the wrist. The further you move the lever forwards or back, the faster the machine moves in the chosen direction.

More Information
Display SKU 11011427
Manufacturer Eliet
Model MA 026 031 439
Engine Power 14 hp
Engine Make Subaru
Professional/ Domestic/ Hire Professional
Overall Dimensions 1680 x 750 X 1390 mm
Weight 319kg
Wheeled Yes
Towed Yes
Capacity 875 kg per hour

PSD Groundscare is part of the GGM Group which means we have a proven infrastructure in place to offer professional service and backup, and with the GGM retail store we are also in contact with the commercial users in our locality, this gives us the information and needs required by both the end users and dealers alike to ensure a seamless service to keep you going. 

Obviously supply of the machines is just the start...with our extensive network of professional dealers across the UK who are there to offer you experienced advice, service and backup they are supported by our extensive spare parts stock, fully trained technicians and sales staff.    

At PSD Groundscare we focus on Groundscare equipment which maximises Productivity, Safety and Durability, delivering solutions to all your landscaping needs:       

  • MACHINERY FOR US IN THE MOST DEMANDING CONDITIONS
  • ROBUST & HIGHLY DEPENDABLE MACHINERY
  • NATIONAL DEALER NETWORK SO THE GUIDANCE YOU NEED IS NEVER FAR AWAY